Aluminum Storefront Door Locks

Aluminum sliding door hook lock

• The hook throw are 5 ply laminated with a harden roller pin inside, and tested for 50 minutes hacksaw (per UL standard).
• Hook throw
• Backset : 31/32", 1-1/8", 1-1/2"
• Different finishes and faceplates are available

Dead bolt swing door lock

• The bolt throw are 5 ply laminated with a harden roller pin inside, and tested for 50 minutes hacksaw (per UL standard).
• 1-3/8" long throw 
• Backset : 31/32", 1-1/8", 1-1/2"
• Different finishes and faceplates are available

Dead latch swing door lock

• The latch is reversible
• Latchbolt 1/2"  throw 
• W/dogging function
• Backset : 31/32" or 1-1/8"
• Different finishes and faceplates are available

Steel box for ML1850, ML1820 & DL4510

• Only for lock with backset 1-1/8"

Dead bolt swing door lock​ with top & bottom bolts

• The bolt throw are 5 ply laminated with a harden roller pin inside, and tested for 50 minutes hacksaw (per UL standard)
• TB-40 top bolt & BB-50 bottom bolt
• 13/16" short throw for ML-1820D-H
• 1-3/8" long throw for ML-1820D-S
• Backset : 31/32", 1-1/8", 1-1/2"
• Different finishes and faceplates are available

Bottom rail deadbolt

• Material: steel casing with stainless steel bolt in 3/8" dia.
• Backset 1-1/8"
• With 13/16" throw

Two-point bottom rail deadbolt

• Material: steel casing with stainless steel bolt in 3/8" dia.
• Backset 1-1/8"
• With 13/16" throw

Two-point deadlock with square hub

• Material: steel
• Backset 1-1/8"

Lever handle for dead latch lock

• Comes with cam plug enables using in conjunction with DL4510 dead latch lock
• Suitable for 44mm door thickness
• Cam plug non-handed - reversible in the field
• Suitable for aluminium and steel doors

Paddle handle for commercial dead latch lock

• Paddle handle comes with cam plug enables using in conjunction with DL4510 dead latch lock
• Suitable for 44mm door thickness
• Cam plug non-handed,  reversible in the field
• Suitable for aluminium and steel doors

Faceplate with knob

• Material : stainless steel or brass
• Dimension : 1.6"x6.2" (40x157mm) , center to center 2-1/2" (63mm)
• Cylinder excluded

Brass cylinder

• Key-way: Schlage, yale or kwikset
• Key different or key alike
• Different surface finishes are available

Anti-bumping brass round cylinder

• Cylinder height : 8pins for 1" or 10pins for 1-1/4" or 1-1/2"
• Blank keys, master key and construction key are available

Brass thumbturn cylinder

• Different surface finishes are available

Zamac cylinder

• Key-way: Schlage, yale or kwikset
• Key different or key alike
• Different surface finishes are available

• 1
• 2
• ›