Anti-bumping brass U.S. cylinder
CB-1003OP
- 8pins and three keys
Related product
Keeper for Two-Point Mortise Lock
- Material: zamac
- Finish: yellow zinc plated
- Height: 0.500" (12.7mm)
- Using with D-80Z two-point mortise lock, recessed faceplate
Sliding door lock - Two-Point hook mortise lock, long version
- Suitable for sliding patio doors
- Fitting most wooden and vinyl patio door design
- Material: steel or stainless steel
- With long faceplate, material: steel or stainless steel
- Operates with a simple American Key Cylinder tail piece
- Opposing hook style latches engage with strike for secure multi point locking
- Center drive: mortise lock can be used on left or right hand door
- Slam retraction: the hooks will retract when in the locked position and slammed against the strike from damage
- Adjustability: the extension of hooks can be adjusted as same as the single mortise locks
- Two opposing locking hooks extended into a keeper mounted on the frame make it virtually impossible for the door to be lifted out of the track
- Pulling force 550kgs (1,200lbs) and 30,000 cycles tested
- Using with all most sliding door handles - #2060, #2070 and #2095
- Different keepers also available
Sliding door lock - Two-Point hook mortise lock, short version
- Suitable for sliding patio doors
- Fitting most wooden and vinyl patio door design with different faceplate
- Material: steel or stainless steel
- With long faceplate, material: steel or stainless steel
- Operates with a simple American Key Cylinder tail piece
- Opposing hook style latches engage with strike for secure multi point locking
- Center drive: mortise lock can be used on left or right hand door
- Slam retraction: the hooks will retract when in the locked position and slammed against the strike from damage
- Adjustability: the extension of hooks can be adjusted as same as the single mortise locks
- Two opposing locking hooks extended into a keeper mounted on the frame make it virtually impossible for the door to be lifted out of the track
- Pulling force 550kgs (1,200lbs) and 30,000 cycles tested
- Using with all most sliding door handles - #2060, #2070 and #2095
- Different keepers also available
Sliding door lock - Single hook mortise lock
- Suitable for sliding patio doors
- With 45 degree hub, vertical hub (optional) also available
- Operates with a simple American Key Cylinder tail piece
- Material: steel or stainless steel
- Strike plate and faceplate also available
- Pulling force 360kgs (800lbs)
- How To Order: please specify (1) type of doors (2) item number
ML-60-1 steel housing with steel hook
ML-60-2 steel housing with stainless steel hook
ML-60-3 stainless steel housing with stainless steel hook
Keeper for Two-Point Mortise Lock
- Material: zamac
- Finish: yellow zinc plated
- Height: 0.710" (18mm)
- Using with D-80Z two-point mortise lock, recessed faceplate
Keeper for Two-Point Mortise Lock
- Material: aluminum
- Finish: powder coated in black, white, bronze and etc.
Sliding door lock - Two-Point hook mortise lock - short version
- Suitable for sliding patio doors
- Fitting most vinyl and aluminum patio door design with different faceplate
- Material: steel or stainless steel
- Operates with a simple American Key Cylinder tail piece
- Opposing hook style latches engage with strike for secure multi point locking
- With short faceplate, material: steel or stainless steel
- Center drive: mortise lock can be used on left or right hand door
- Slam retraction: the hooks will retract when in the locked position and slammed against the strike from damage
- Adjustability: the extension of hooks can be adjusted as same as the single mortise locks
- Two opposing locking hooks extended into a keeper mounted on the frame make it virtually impossible for the door to be lifted out of the track
- Pulling force 550kgs (1,200lbs) and 30,000 cycles tested
- Using with all most sliding door handles - #2060, #2070 and #2095
- Different keepers also available