Outside trim for exit device

• Material: solid brass
• 6 pins cylinder with 2 keys, Schlage C keyway
• Using with EH-691, EH-693 outside trim for exit devices

• Material: solid brass
• 6 pins cylinder with 2 keys, Schlage C keyway
• Using with EH-694, CP-627, CP-628 outside trim for exit devices

• Material: steel or stainless steel
• Size: 2.9” X 1.8”/ 75 X 45mm (W x H)
• Including RC-1004 rim cylinder 6 pins, Schlage C keyway

• Material: steel or stainless steel
• Size: 3.6” X 6.4”/ 90 X 162mm (W x H)
• Including RC-1004 rim cylinder 6 pins, Schlage C keyway

• Material: zamac
• Function: passage, storeroom, classroom available
• Including brass cylinder 6 pins, Schlange C keyway
• Door prep.: 2-1/8” (54mm)
• For Door thickness: 1-3/8”-2” (35-51mm)
• Different surface finishes are available

• Lever handle L type
• Material: brass or zamac
• Different surface finishes are available
• Includes MC-1004 mortise cylinder 6 pins, Schlage C keyway

UL ANSI/BHMA A156.3 Grade 1 Approved, 3 Hours fired rated

• Size: 33” standard for door width of 2’8” to 3’0”; 45” standard for door width of 3’8” to 4’0”.
• Door thickness: 1-3/4” (45mm) standard for wooden or metal doors, please specify if other than 1-3/4”(45mm).
• Stile: 4-1/4” (108mm) minimum
• Projection: 2-1/2” maximum ~ 1-7/8” pressed.
• Backset: 2-3/4” (70mm) from edge of door
• Handing: Non-handed (Reversible for left hand and right hand use)
• Recommended mounting height:  40-5/16” (1024mm) from finished floor to center line of push bar
• Mounting: furnished standard with sheet metal and machine screws or SNB (sex nut & bolt) for fire rated exit devices as optional.
• Different types of outside trims are available
• The alarm kit is available.

UL ANSI/BHMA A156.3 Grade 1 Approved

• Size: 33” standard for door width of 2’8” to 3’0”; 45” standard for door width of 3’8” to 4’0”.
• Door thickness: 1-3/4” (45mm) standard for wooden or metal doors, please specify if other than 1-3/4”(45mm).
• Stile: 4-1/4” (108mm) minimum
• Projection: 2-1/2” maximum ~ 1-7/8” pressed.
• Backset: 2-3/4” (70mm) from edge of door
• Handing: Non-handed (Reversible for left hand and right hand use)
• Dogging: Latch bolt can be held retracted by 1/4 turn, allen key dogging (only for panic rated) or heavy traffic application
• Recommended mounting height:  40-5/16” (1024mm) from finished floor to center line of push bar
• Mounting: furnished standard with sheet metal and machine screws or SNB (sex nut & bolt) for fire rated exit devices as optional.
• Different types of outside trims are available
• The alarm kit is available.