Touch bar exit rim device, panic rated
ED-690
UL ANSI/BHMA A156.3 Grade 1 Approved
- Size: 33” standard for door width of 2’8” to 3’0”; 45” standard for door width of 3’8” to 4’0”.
- Door thickness: 1-3/4” (45mm) standard for wooden or metal doors, please specify if other than 1-3/4”(45mm).
- Stile: 4-1/4” (108mm) minimum
- Projection: 2-1/2” maximum ~ 1-7/8” pressed.
- Backset: 2-3/4” (70mm) from edge of door
- Handing: Non-handed (Reversible for left hand and right hand use)
- Dogging: Latch bolt can be held retracted by 1/4 turn, allen key dogging (only for panic rated) or heavy traffic application
- Recommended mounting height: 40-5/16” (1024mm) from finished floor to center line of push bar
- Mounting: furnished standard with sheet metal and machine screws or SNB (sex nut & bolt) for fire rated exit devices as optional.
- Different types of outside trims are available
- The alarm kit is available.
Material:
Dimension: ( unit: mm )
Installation application:
Related product
Mortise cylinder for exit device
- Material: solid brass
- 6 pins cylinder with 2 keys, Schlage C keyway
- Using with EH-691, EH-693 outside trim for exit devices
Rim cylinder for exit device
- Material: solid brass
- 6 pins cylinder with 2 keys, Schlage C keyway
- Using with EH-694, CP-627, CP-628 outside trim for exit devices
Cylinder pull plate for exit device
- Material: steel or stainless steel
- Size: 2.9” X 1.8”/ 75 X 45mm (W x H)
- Including RC-1004 rim cylinder 6 pins, Schlage C keyway
Outside trim for exit device
- without thumb piece
- Material: steel faceplate with zamac pull
- Different surface finishes are available
- Including RC-1004 rim cylinder 6 pins, Schlage C keyway
Lever handle for exit device
- Lever handle L type
- Material: brass or zamac
- Different surface finishes are available
- Includes MC-1004 mortise cylinder 6 pins, Schlage C keyway
Touch bar exit vertical rod device, panic rated
UL ANSI/BHMA A156.3 Grade 1 Approved
- Size: 33” standard for door width of 2’8” to 3’0”; 45” standard for door width of 3’8” to 4’0”.
- Door thickness: 1-3/4” (45mm) standard for wooden or metal doors, please specify if other than 1-3/4”(45mm).
- Stile: 4-1/4” (108mm) minimum
- Projection: 2-1/2” maximum ~ 1-7/8” pressed.
- Backset: 2-3/4” (70mm) from edge of door
- Handing: Non-handed (Reversible for left hand and right hand use)
- Dogging: Latch bolt can be held retracted by 1/4 turn, allen key dogging (only for panic rated) or heavy traffic application
- Recommended mounting height: 40-5/16” (1024mm) from finished floor to center line of push bar
- Mounting: furnished standard with sheet metal and machine screws or SNB (sex nut & bolt) for fire rated exit devices as optional.
- Different types of outside trims are available
- The alarm kit is available.
Panic exit vertical, concealed rod device
- UL-listed panic exit device
- Especially for use with narrow 2" width stile metal doors
- Standard unit fits doors up to 48" in width, cutting the crossbar to fit
- Units are mounted on door with concealed screws
- Looking from outside, please specify left or right hand
- Device can fit any standard rim cylinder
- Finishes: Al, BLK and DU (aluminum pads in baked paint,aluminum cross bar in anodized)
Panic exit rim device
- UL-listed panic exit device
- Especially for use with narrow 2" width stile metal doors
- Latch bolt throw 1/2"
- Dogged by cylinder key or by slotted screw in bottom of inside pads
- Standard unit fits doors up to 48" in width, cutting the crossbar to fit
- Units are mounted on door with concealed screws
- Looking from outside, please specify left or right hand (for example, 6301-01L)
- Device can fit any standard rim cylinder
- Finishes: AL, BLK and DU (aluminum pads in baked paint,aluminum cross bar in anodized)